Metal Cutting Saws Secrets?

When I first saw the Panasonic EY3530 Metal Cutting Saw, I thought it looked good but probably would not be practical on the job. But I was wrong. Go to any construction job and you will nearly all of the tradesmen using cordless metal cutting saws.

A cordless metal cutting saw is a circular saw which spins a metal blade tipped in carbide at a specific RPM. Usually, this form of saw will include a guard to prevent metal shavings from flying into the air. You can cut through mild steel with these saws. The cuts will be cool and clean. In fact, one of the most beautiful stories involves a salesman entering the premises of a potential customer, revving up the saw and cutting straight through a threaded rod and threading on a nut-all prior to this customer kicking him out of his office. This, as it turns out, was a very effective sales technique in many instances.

Hot Discussion: Metal Cutting Saws

Any mild steel, like threading rod, unit-stud, EMT pipe, metal siding, and duct work can be cut by cordless metal cutting saws. You can also purchase blades for aluminum. It isn’t recommended. However, some people have used them on copper. The most common thing these saws are used on threading rod, EMT pipe, and strut. You will get a better cut if you have a blade with more teeth if you’re cutting thin metals. milling and grinding operators Ontario.

You can get saws like these from DeWalt, Milwaukee, and Makita, but the Panasonic EY3530 is the most popular saw. If you already have a saw, but want to improve your cut, Tenyru sells the best carbide tipped blades for almost any saw. I feel that it is important to bear a saw that is specific for the fine job you’re doing, but if you only want to get a carbide blade your saw should be okay. Go ahead and try them out.

While using it make it a point to use correct blade. This is properly sharpened as dull blades can bind and could be overheated. See to it that the thickness of the blade doesn’t exceeds more than inch, more than the depth of the wood to be cut The work piece is most likely to kick back if you have too much blade exposed. Before using a circular saw equip yourself with an eye-protector or eye-cover.

A majority of the producers of power tools will provide a 30-day guarantee. I offer a similar warranty to my customers. However, these tools perform so well that I’ve never had to take one back. Try out the Panasonic EY3530 Metal Cutting Saw and you will not be disappointed.


Leave a Reply

Your email address will not be published. Required fields are marked *